News center .
Material characteristics and application of good price and quality road stud reflector material
2022-03-11 00:23:06.009
Good price and quality road stud reflector is very common and widely used in our daily life. It plays a warning role, so that we can be aware of the danger in time and greatly reduce the probability of accidents. Good price and quality road stud reflector are used in many places.
Characteristics and principle of good price and quality round reflex reflector materials
2022-03-10 23:46:44.458
Material characteristics and installation precautions of circular plastic reflector
2022-03-03 21:51:56.519
Good price and quality Round plastic reflector7.5.2 In all plastic reflector materials, the diameter of the plastic disc reflects the reflected light. A diameter greater than one inch will bend light which is reflected from one surface of the material. The following types of plastic reflectors are available: round (i.e., plastic with a diameter less than one inch), rectangular (i.e., plastic with a diameter less than 1:10), or elliptical (i.e., plastic with a diameter greater than 1:10). The plastic disc is spherical and is made of aluminum or the plastic of plastic material which contains an insulating layer. The good price and quality Round plastic reflector is fixed on one end and extends in the opposite direction from the reflective surface from the main body of the object.
2022-02-17 13:50:11.319
The good price and quality emark reflector products of the vehicle body is a combination of reflective materials installed or pasted on the surface of the vehicle body to enhance the identifiability of the vehicle. In short, it is a emark reflector set on the vehicle body. It can greatly improve the identifiability of large transport vehicles at night, dusk, rain, fog and other low visibility conditions, and can effectively prevent and reduce rear end accidents caused by poor identifiability of large transport vehicles under low visibility conditions. It is an effective means to prevent rear end accidents at night. According to the different composition materials, the body reflex truck reflector are divided into reflective film type body reflex truck reflector and reflector type body reflex truck reflector.
2022-02-17 11:02:38.470
At present, rear end collision accidents can be found everywhere. A large part of the reason is that the vehicle reflector effect of the reflective plate at the rear of the vehicle is poor, the visibility is low, the braking distance is short, and the driver can't reflect it, resulting in accidents and even casualties. Many times, it is because of a small detail, that is, the good price and quality vehicle reflector logo of the car body is missing or the vehicle reflector from China manufacturer of the car body is not pasted well.
Characteristics and installation conditions of customized auto reflector from china
2022-02-10 15:23:34.973
Most customized auto reflectors from china are made from non-reflective polymers like plastics, vinyl or polyurethane which are more flamm-resistant but typically not completely transparent. The reflective characteristics of customized auto reflectors depend on three main factors:Method (e.g. reflectivity vs. opacity) How much light is required to show the car's shape (e.g. light loss due to diffraction) Why customized auto reflectors are made (typically low cost materials and high yields)Auto reflectors in use can be classified using these three main dimensions: Light is emitted from the auto reflector from china and must pass through a surface that reflects it to be shown. Reflectivity is typically obtained in terms of the amount of light that can be absorbed by the customized auto reflector from china. Larger reflectors, which are generally in the range of 35 - 70 nm, are typically more reflective.
