Application of road stud reflector products in road

2021-12-28 14:03:02.369

Function of road stud reflector products.On a road to which subsection applies, the reflector or other component of a road marker, sign or other device that is installed to meet the requirements of this subsection cannot be considered to have been replaced or attached if:(a) the use of that component of the road marking, sign or other device by that road marking, sign or other device had been discontinued or was discontinued; or(b) the use that that component had been was discontinued or was discontinued but was reinstated.Division 2—Road marking4L Compliance with specified lighting standards(1) A road marking, sign or other device must comply with the requirements of the requirements specified in the standards.(2) The requirements may be specified, by reference to a particular colour, as being requirements of the requirements.

Ningbo Baixuejia Reflector Co.,Ltd was found in 1995

2021-12-28 14:02:12.559

Ningbo Baixuejia Reflector Co.,Ltd was found in 1995,located in the bank of beautiful hangzhou bay—CIXI,attached to coastal city—Ningbo. Which is close to 329 state road. Convenient transportation,Superior natural conditions. Because of the continuous efforts of all staff,The company has become a large scale corportion of plastic mould design, development, production, sales Since establishing.

In addition to providing our available reflectors

2021-12-28 14:01:45.171

In addition to providing our available reflectors,we can do OEM to achieve customer requirements. We will adhere to super quality,best service. Preparing to cooperate with every customer at home and abroad

Common problems during road stud reflector installation

2021-12-28 14:01:20.547

With the wide application of road stud reflector in domestic high-grade highways and municipal roads, the quality and service life of road stud reflector have received more attention. In the actual application process, the road stud reflector is damaged and the service life is reduced frequently due to installation problems. Based on years of construction experience, the author summarizes the problems that often occur during the installation of road stud reflector, and proposes a reasonable installation method. I hope to discuss with colleagues in the transportation industry.

Standard and application of E-MARK reflector products

2021-12-28 14:00:48.817

E-mark reflector products is a high-tech optical reflector designed for high-resolution DSLR cameras. It increases the light transmission through the lens for a better optical rendition of the original image as well as reducing the dark areas of a cropped picture.Note that the resolution of a camera may be considerably more or less than that of an optical reflector. Also, the resolution of an objective lens may be less than that of the camera's camera sensor.